At Hydrogen Expo in Hamburg, the Quick Connector TW850-S60 H2 was a true crowd magnet – and for good reason, the WEH Group announced.
Hydrogen trailers are essential for supplying fueling stations and mobile H2 units. But traditional screw fittings for refueling the H2 trailers?
Time-consuming
Risk of thread damage
Requires training & tools.
The new quick connector is different:
Connects in under 1 second
No screwing, no tools
100% pressure-tight – up to 530 bar
Preserves threaded ports – no wear & tear.
The challenge is reliable supply of hydrogen fueling stations if hydrogen cannot be produced directly on site. Along with the establishment of an H2 pipeline network, trailers for fine distribution are required that can transport hydrogen from central filling stations to fueling stations. The connection of the lines to these trailers is currently accomplished using mostly tube fittings, which are time-intensive and require special training.
The WEH® Connector TW850-S60 H2 is the optimal solution for safe, fast and efficient filling of hydrogen tanks, such as H2 trailers for fueling station supply, with a maximum operating pressure of up to 530 bar.
Thanks to the innovative clamping jaw mechanism and continuous technical nominal width of 10 mm, the quick connector enables the highest flow values and significantly reduces filling time. Easy handling and the elimination of laborious tube fittings make the TW850-S60 H2 an essential tool for filling hydrogen trailers and suppliers.
Thanks to the integrated locking lever, unintentional loosening of the connector is reliably prevented, which maximizes safety during the filling process. With its H2 compatibility and robust design, the TW850-S60 H2 sets new standards in hydrogen logistics and supports the growing demand for efficient solutions for the energy revolution.
Technical Nominal SizeUp to 10 mm, depending on design
Max. allowable operating pressure PSPS = up to 530 bar, depending on design
Temperature Range-40 °C to +65 °C
Medium Hydrogen
Leak Rate1 x 10-3 mbar x l/s
Actuation Manual actuation via sliding sleeve
Material Corrosion resistant
Sealing Material NBR.
Image of WEH Group
Source https://tinyurl.com/mr7ehjv7
